Honda and Acura Car Forums banner
1 - 3 of 3 Posts

· Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
I have a 97 honda cx hatch ...
I want to bulid up my motor so I can boost it
What type of mods do I need to do ....
My goal right now is 12 psi w/ a 50 shot of nos
so far i know I need to upgrade my fuel line and pump as well
as the rail and injectors ..a new intake man. ..throttle body ...cams pistons and rings and valve springs
Am I missing anything
Also the main ? is will my little cx hold all this pressure
or should i be looking for a new motor first
Thanks
 

· Registered
Joined
·
112 Posts
I would do a swap first go with a B18c or B16a. The B16a would cost you less.
 

· Registered
Joined
·
666 Posts
Regardless of which motor you choose, the basics for building a turbo motor are the same. There have been several recent threads on this topic, so search back a bit and you should get all of the info you need.

The only thing I would add is that if you are going to spray also, you should ceramic coat all of the combustion chamber parts (piston tops, valves, heads).
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top