Honda and Acura Car Forums banner
1 - 1 of 1 Posts

· Registered
Joined
·
208 Posts
Undo what you did and use some relays up by the headlights. Disconnect them and make it so the normally closed circuit is low beam and the triggered open circuit is high beam... when you click on the high beams and the high beam input from the car hits into the relay, the switch will jump to high beams and open the connection to low beam. Kinda confusing if you don't know relays well, just find someone that does and pay them :D
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top