Honda and Acura Car Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter · #1 ·
sup. i just put in a b18a into a 90 civic.had to do a dual point to mpfi.
car runs fine. but when driving for a while. the check engine light will come on.with a code 20. for a eld. when the light comes on. car can not move and will not rev past 3500 rpm. i already put a new under fuse box. but still happens. any help woul be great thanks.
 

·
Registered
Joined
·
14 Posts
Discussion Starter · #4 ·
ok i think i found the problem. i checked every thing. and found the pcm that i have is worng. it was a pm6 for an civic si. i used the pr4 from a integra. thing every thing else works fine. thanks for all yur help.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top