Honda and Acura Car Forums banner
1 - 11 of 11 Posts

· Registered
Joined
·
172 Posts
Discussion Starter · #1 ·
TODA pistons/valve springs/itb/spec c cams/head gasket
Crower rods
Nitrous (100 shot)
Hondata s200

High compression with nitrous anyone?
 

· Registered
Joined
·
2,575 Posts
Be it that the lowest c/r of a TODA piston for a B18c is 12:3:1 w/ a TODA head gasket(t=0.6mm) you wont be able to use a hundered shot.

Stick with you part listed(excluding N2O) as stated and youll be fine. Get that thing dynoed/tuned too...im curious on how much power youll be making.

Good Luck:)
 

· Registered
Joined
·
172 Posts
Discussion Starter · #3 ·
haha jayman, I can use it =) trust me....

but im about $1000 short for the motor soooo I need to save a lil bit more projected hp is about 300ish enough for 12s.

I forgot to mention I'm getting it sleeved so it doesnt umm well blow itself into 10000 pieces
 

· Registered
Joined
·
214 Posts
If you're going for a 100 shot you can do just fine with a GSR motor with stock internals. Of couse you definitely need a better ignition and a high pressure fuel pump, plus retard your ignition. A jacob mastermind would be a big a$$ plus. Being that you still need a $1,000 to get the motor I would worry about that first. Are you trying to build your car mainly for NOS? It looks like from your setup you're going somewhat NA.
 

· Registered
Joined
·
172 Posts
Discussion Starter · #5 ·
hahah i know exactly what i need bro..


its just a mostly NA nitrous motor...

I've built 5 similiar GS-R engines execpt the ITB was from TWM not TODA...but yeah mainly na but you know nitrous is just fun to have...and im gonna have an active retard so my performance isnt slugged down a bit when im not squeezing...I just need a grand to finish the motor...for the nitrous but 270 na hp would be fine w/o the nitrous....I just gotta go pick up my type R tranny and final drive.
 

· Registered
Joined
·
2,575 Posts
j619pinoy said:
Hey are you in Tokyo, Japan right now? If so, how are the prices for JDM parts for Integras? hahahah just curious

Lets just say you can pick up a JDM DC2 ITR for 8k.

It has the front conversion that everybody loves,engine,interior...need I say more?

I wish I could speal Japanese:(
 

· Registered
Joined
·
172 Posts
Discussion Starter · #8 ·
Hahaha not really JDM here...more like...domestic. =P

Quality is same..GReddy = Trust etc., just we dont pay for shipping...

And a good DC2 ITR...I can find for less than 8K...just find one that had a little rear end collision...and buy a stock bumper for it..tada problem solved.

I go back and forth between Tokyo and Los Angeles. But I'm originally from Tokyo. Half japanese half english =)
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top