Honda and Acura Car Forums banner
1 - 4 of 4 Posts

· Registered
Joined
·
13 Posts
Discussion Starter · #1 ·
i have an LS with itr pistons, stock rods, and arp rod bolts, dsm 390cc inj, and a 255lph intank. just wondering if you guys think i'll be ok to run a 75 shot using dry shot and a tuned nitrous map. pretty much a wet kit just using computer to add fuel. tried the stickys link but it is closed. thanks guys.
 

· Premium Member
Joined
·
23,755 Posts
you dont generally want to use nitrous with itr or ctr pistons. the pistons are cast and to a point are brittle. When you raise the cylinder pressures as high as nitrous does you run a real chance of destroying the pistons around the ring lands...with jsut a straight ls and itr pistons..i'm going to bet your compression is around11:1. I wouldnt honestly run nitrous on this setup beyond a 50 shot and I'd be wary with that as well even with adding the extra fuel.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top