Honda and Acura Car Forums banner

nuespeed header

557 views 5 replies 5 participants last post by  lOOkatme 
#1 ·
will a nuespeed header off a h22a4 fit a h22a1
 
#4 ·
Hey,
The cat bolt pattern is the exact same so is the head bolt pattern. The only difference is that the new prelude lower section is a little shorter. All you have to do is weld an extension in. 8 3/4 of an inch works perfect. I have done this for fitting H22a4 down pipe on an h22a1 and I put a h22a1 greddy header on and H22a4 so I have experiance here. Any muffler shop should be able to take care of you.
Josh
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top