Honda and Acura Car Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
88 Posts
Discussion Starter #1
Hey,

Can someone help me? I have a old leak on my 94 prelude vtec. It think it's comming fromt he right side fot he engine. I think it's the gasket taht to the pullies....HOw much will it take for me to get it fixed. I heard taht the shop have to take everything out and then sand the gasket off.\

Help...\\

Thanks,\\Ko
 

·
Registered
Joined
·
4,212 Posts
Are you sure its not the valve cover gasket? Clean off all the mess and drive again, and check to see where its coming from. But other thing, you said right side of the engine, are you speaking as you were sitting in the car? or as standing in the front of the car? well if its from the front of the car on the right of the motor, then its gonna require the cam pulley gears to be removed, and cam holders gotta be removed, then the seal will come off the cam. But if its on the right of the engine from inside of the car, then its the cam seals, which are easy to remove. But if its coming from the distributor, its easy too, replacing the rubber o-rings on the distributor shaft.
 
1 - 3 of 3 Posts
Top