Honda and Acura Car Forums banner

1 - 20 of 29 Posts

·
Registered
Joined
·
523 Posts
Discussion Starter #1
Well ladies and gentlemen ...it looks like the time is near...Im in the market for a 2003 Evo 8 and the lude will be layed to rest. All these parts will be off the car and ready to sell by the end of Febuary, so right now I will just be taking dibs on the items . prices do not include shipping

Engine

1)DC sports Ceramic coated header (6 months old) - 150$
2)Apex'i N1 exhaust (6 months old) - 350$ + stock
3)aem cold air intake (7 months old) - 70$ + stock
4) Kteller test pipe - even trade for stock cat
5) Aem tru power pulleys (3 months old) - 100$
6) VAFC II (black housing)(4 months old) - 275$


Suspension

1) DC Sports rear lower tie bar (2 months old, blue) - 70$
2) BRAND NEW less then 200 miles! Rota Sub zeros , steel grey with polished lip, 17x7.5 48MM offset, wrapped in BFGoodrich TA KDW-2's with 99% tread! -$1100 or 900$ with stock wheels with tires

Lip kit

1)*Brand NEW* never used straight from VIS mugen sides/rears - 400$
2) Greddy Front Lip (6 months) - 130$


Accesories

1) JDM Shift boot(red stitch) - 25$
2) Skunk2 shift knob(less then 1 month old) - 30$
3) Autometer Dual gauge pod - 20$
4) Autometer Air fuel ratio gauge - 40$
5) Autometer Oil pressure gauge + stainless steel braided lines, fittings, everything needed thats a pain in the ass to buy for gauge install - 50$
6) Spoon Radiator cap - 25$
7) Mugen oil cap - 15$
8) Honda OEM CF trim - 80$
9) JDM type-s gauge bezel - 70$

PICTURES UP!!!

THE GREDDY LIP



THE RIMS FOR SALE...Rota SubZeros...steel grey w/ polished lip!



tires






AEM COLD AIR INTAKE



KTeller stainless steel test pipe



AEM Pulleys



pic of the exhaust...best i can do right now




ITR shift knob

 

·
Registered
Joined
·
21,276 Posts
ludermark said:
Well ladies and gentlemen ...it looks like the time is near...Im in the market for a 2003 Evo 8 and the lude will be layed to rest. All these parts will be off the car and ready to sell by the end of Febuary, so right now I will just be taking dibs on the items . prices do not include shipping

Engine

1)DC sports Ceramic coated header (6 months old) - 150$
2)Apex'i N1 exhaust (6 months old) - 350$ + stock
3)aem cold air intake (7 months old) - 70$ + stock
4) Kteller test pipe - even trade for stock cat
5) Aem tru power pulleys (3 months old) - 100$
6) VAFC II (black housing)(4 months old) - 275$


Suspension

1) DC Sports rear lower tie bar (2 months old, blue) - 70$
2) BRAND NEW less then 200 miles! Rota Sub zeros , steel grey with polished lip, 17x7.5 48MM offset, wrapped in BFGoodrich TA KDW-2's with 99% tread! -$1100 or 900$ with stock wheels with tires

Lip kit

1)*Brand NEW* never used straight from VIS mugen sides/rears - 400$
2) Greddy Front Lip (6 months) - 130$


Accesories

1) JDM Shift boot(red stitch) - 25$
2) Skunk2 shift knob(less then 1 month old) - 30$
3) Autometer Dual gauge pod - 20$
4) Autometer Air fuel ratio gauge - 40$
5) Autometer Oil pressure gauge + stainless steel braided lines, fittings, everything needed thats a pain in the ass to buy for gauge install - 50$
6) Spoon Radiator cap - 25$
7) Mugen oil cap - 15$
8) Honda OEM CF trim - 80$
9) JDM type-s gauge bezel - 70$
whats shipping on the sides and rear lip
 

·
Registered
Joined
·
671 Posts
I am interested in the lip kit. Doyou have pics?
 

·
Registered
Joined
·
3,967 Posts
I might take that VAFC II off your hands... you gonna give me everything i need to hook it up to my 97 base?
 

·
Registered
Joined
·
112 Posts
Autometer Oil pressure gauge + stainless steel braided lines, fittings, everything needed thats a pain in the ass to buy for gauge install - 50$

I'd like to take it. What is the shipping to 91789?
 

·
Registered
Joined
·
523 Posts
Discussion Starter #7
as of right now im not looking to cut big deals because these parts will go since I have about a month to sell most of it..

Prices are without shipping.

98Vtec...your in florida so if you want you can come pick up the sides and rears if your interested...if not Im not quite sure on shipping yet but it shouldnt be that bad since your close in FL.

PreludeClone...the vafcII has everything needed to install...even the little stand for it.

lumanogin ....sides and rears are 400$ + shipping...and the cf trim if you want it pm me and we can do the sale.

ADR....ill sell it all for 57$ shipped to that address.

rev 2 10k...no pics on the lip kit yet ill put up pics of some of the stuff within a week....are you interested in the whole lip kit including greddy front...

pm me if you guys show real interest ready to buy.
 

·
Registered
Joined
·
112 Posts
Autometer Oil pressure gauge + stainless steel braided lines, fittings, everything needed thats a pain in the ass to buy for gauge install - 50$


DO you have a picture of that? Are those hard to install?
(once i see the picture, and the pot, I will make my desicion.thanks)
 

·
Registered
Joined
·
112 Posts
Can't see the picture. You can not link pictures in imagestation without sharing it. Can you put it in SHO again?
 

·
Registered
Joined
·
523 Posts
Discussion Starter #15
adr said:
Can't see the picture. You can not link pictures in imagestation without sharing it. Can you put it in SHO again?

I can see the pictures fine...?

What do I have to do to make them show up...if they really aren't which I think they are?
 

·
Registered
Joined
·
21,276 Posts
ludermark said:
I can see the pictures fine...?

What do I have to do to make them show up...if they really aren't which I think they are?
host them through SHO photopost.

about the sides and rear. I'm gonna have to get back to you on it. If someone else wants it then sell it to em, i gotta check my funds
 

·
Registered
Joined
·
523 Posts
Discussion Starter #17
98Vtec said:
host them through SHO photopost.

about the sides and rear. I'm gonna have to get back to you on it. If someone else wants it then sell it to em, i gotta check my funds

my sho photo posting is filled up =\...im going to have to find something else.


yea thats cool man im in no rush to sell them so just shoot me a pm if you want to buy them.
 

·
Registered
Joined
·
21,276 Posts
ludermark said:
my sho photo posting is filled up =\...im going to have to find something else.


yea thats cool man im in no rush to sell them so just shoot me a pm if you want to buy them.
email me the pictures and i will put them up for you. I have unlimited space :)

[email protected]
 
1 - 20 of 29 Posts
Top