Honda and Acura Car Forums banner
61 - 80 of 87 Posts

·
Registered
Joined
·
54 Posts
b16 crx time

90 crx si
jdm b16a
custom cold air intake
dc sports header(no exhaust)
msd sci plus
msd blaster coil
msd plug wires
aem fuel rail
aem fpr
zex spark plugs
zex dry 75 shot
stock pr3 ecu
running on 24.5x8.5x13 m&h tires bogart wheels
60' 1.859
330 5.221
1/8 [email protected]
1000 10.416
launching on two step at 5600(bogged a bit off line)shifting at 8000rpm,clutch slipping all the way thru 3rd and 4th.
1/4 [email protected]
 

·
Registered
Joined
·
49 Posts
92 eg4 civic hatch si.
B16a motor
short ram intake
pacestter hedders(at least it looks like them)
full 2 1/2" exhaust out to an Arrowspeed muffler
no rev limit/no speedcut
everything else is stock.

the car


the motor(can someone tell me what type of hedder is it)
 

·
Registered
Joined
·
264 Posts
97 integra GS i/h/e, a/c, p/s, full interior, 1/2 tank of gas, stock shitty 14's tires

reaction 0.668
60 ft 2.532
mph 65.98
et 10.581

reaction 0.697
60 ft 2.500
mph 66.27
et 10.551

ive only raced this car once...and i was really disappointed...i was expecting to be in high 9's....
 

·
Registered
Joined
·
417 Posts
89 Civic 3 Door Hatch
88 DOHC ZC motor - NA
All Stock Internals
Crespo Stage 4 camshafts
Dual Weber 45 DCOE Carburetors
Greddy Header/Open Exhaust
MSD 6AL
MSD 8979 Programmable Ignition Computer
ZEX 10 lb. Flywheel
Innovate LM-1 Wideband O2 Datalogger
Lexan Windows
Carbon Fiber ZC Hood
9.5/22 x 13 M&H Slicks
3.5/22 x 15 M&H Skinnies
Weld Racelite Import Wheels (6 lbs each!)
Skunk2 Coilover Drag Launch Springs
ACT Xtreme Pressure Plate
ACT Street Performance Disc
ZC/ROVER 4.44 Hybrid Transmission

Best E.T. - 13.50 - Pueblo, CO Motorsports Park (4900ft Elevation)
Best MPH - 97.96 - Pueblo, CO Motorsports Park (4900ft Elevation)
Best 60' - 1.794 - Pueblo, CO Motorsports Park (4900ft Elevation)

Video Download - 13.744 at Bandimere Speedway (5800ft elevation!)
http://www.zcspeed.com/images/media_gallery/13744bandi.mov

video takes a little time to download - be patient
 

·
Registered
Joined
·
384 Posts

·
Registered
Joined
·
412 Posts
I guess I'll post. Track Elevation is 3075, and this is without my gears. Don't have slip anywhere near me
r/t: ?
60: 2.3
1/4: 14.1
mph: 102

I think DA was around 5000 that night. If I could hook, I'll be good.

Quick question, about how much hp does it take for a stock weight 93 hatch to run in the 14's? D motor and Trans. Thanks.
 

·
Registered
Joined
·
412 Posts
Cool, that is what I was hoping. New DD, running 14's would be just fine. Faster then my friends mustang atleast:lol2
 

·
Registered
Joined
·
412 Posts
that would be funn. I just rased a 96 cobra, in my 2000 si with boltons chiped ecu, and got him by about two cars on the freeway two times. check out my time slip on here:
2000 Honda Civic si stock motor 1/4 mile trap speeds 0-60 - DragTimes.com
Yea, those sn-95 stangs aren't too great. The cobras are much better than the 2v ones though. For a daily driver though, they are fast enough, and when I get my hatch then that is good enough for me. I have my "fast" car for the weekends. How much in mods to your b16? Just i/h/e and a chipped ecu? No cam gears or milling of heads or nothing?
 

·
Registered
Joined
·
8 Posts
no miling just stock motor, no ac/power steering belts. and the 00 si coup is about 400 pound havier then hachbacs. just make sure you use cold air intake, and 1 pece header with 2.5" piping all the way. and you will have a monster. so far i think this is the fastest stock motor 2000 si in US that ive sean. I even take on the 2008 si/rsx with bolt ons. hach backs with b20vtec's, proubably i got a good feel for the tune. will dino tune it tomorow to see the horse power.
 
61 - 80 of 87 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top