Honda and Acura Car Forums banner
1 - 5 of 5 Posts

· Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
b16a t3/t04e ceramic ball bearing turbonetics turbo. compression is good from the last time i check it, no leaks on turbo(other than a return oil line). smokes at cold starts then goes away. no loss of power. any ideas?
 

· Registered
Joined
·
10,346 Posts
wont spin? if everything else checks out, replace the gaskets on the manifold, no mater what that thing should be able to spin, even if its really slow. It might take a while for the exhaust pressure at idle to get it spinniung, but it will.

double check and report back dude
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top