Honda and Acura Car Forums banner
1 - 14 of 14 Posts

· Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
i need to ask someone for advice. i have saved up some money to do a huge upgrade. my car is a 94 accord exr and it already is slammed (3.5" on ground control) and it was running 15.5 with a slipping clutch, since then i have put in a centerforce clutch with an 8 lbs lighter flywheel. i have many upgrades done to the car and the engine, now i have money to do one the next,
1- 18" rims with parada tires
2- turbo my engine (f22a)
3- engine swap (h22a1 jdm)

what would you guys choose???
:confused:
 

· Registered
Joined
·
1,923 Posts
heheh..
my h22 has my accord act clutch on it, the accord fuel rail(so the fuel fittings dont have to be modified), and i ran the accord intake on it til i got a larger diameter intake. but most people i know just use their accord AEM Cai on the h22...the prelude exhaust manifold and down pipe also bolted right up to my cat....on a 5th gen accord you have to cut an inch or two off the exhaust system though.
 

· Registered
Joined
·
766 Posts
either rims or turbo
 

· Registered
Joined
·
350 Posts
94accordboss said:
i need to ask someone for advice. i have saved up some money to do a huge upgrade. my car is a 94 accord exr and it already is slammed (3.5" on ground control) and it was running 15.5 with a slipping clutch, since then i have put in a centerforce clutch with an 8 lbs lighter flywheel. i have many upgrades done to the car and the engine, now i have money to do one the next,
1- 18" rims with parada tires
2- turbo my engine (f22a)
3- engine swap (h22a1 jdm)

what would you guys choose???
:confused:
Unless your motor has a load of miles on it, I'd go with the turbo. With a turbo, you'll turn that 15.5 to a 14.5 relatively easy.
 
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top