Honda and Acura Car Forums banner
1 - 4 of 4 Posts

· Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
I have a stripped key for my wheel locks and I need to get a new one. The only problem is I don't know which brand they are. There is no manufacturers name on the nut or key. The only identifier is the number on the bottom of the key "463". It has/had nine teeth. Here is a pic...


So if anyone could give me an idea of what the manufacturer is I would greatly appreciate it. Thanks in advance!
 

· Registered
Joined
·
754 Posts
You can buy a kit to remove wheel locks just call around and ask or take it to a rim shop they should be able to remove them.
 

· Super Nazi Mod
Joined
·
5,806 Posts
go down to the local hardware store buy you about 16 nuts. maybe about a size 14. take them home break out your welder clean the top of the lug nut place the nut you bought on the top and weld it on the inside do this to all then get your socket and take them off. place a wet rag on the rim where sparks would fly so you don't mess it up
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top