Honda and Acura Car Forums banner
1 - 7 of 7 Posts

· Registered
Joined
·
139 Posts
Discussion Starter · #1 ·
Anyone know what size wheel locks we use on 99 Accord Coupes?
I just recently ordered Axis Se7ens 18" and i need to order some wheel locks.
Any suggestions?
Type? Size?

Any help would be appreciated.
 

· Registered
Joined
·
658 Posts
you need 12mmx1.5mm lugs.

they have to be of the "tuner style" because those wheel lug openings are quite small!

the lug tips have to be tapered or ACOrn :D style.

and you probably want open ended lugs because there is a center cover.
 

· Registered
Joined
·
103 Posts
be careful with the McGard tuner Style locks, the set I had, had a key that partially fit in one way and fully fit the other, so sometimes when i took the wheel locks off they didn't go in all the way.. well they started to crack and 1 of them actually broke off while it was still on the stud...had to get it drilled out. I checked the other 3 and they were all partially cracked....
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top